Introduction
Use this guide to replace a battery on the sony WH-1000mx5
-
-
Place the edge of an iFixit opening tool under the earpad cushion.
-
Slide it alongside the edge of the cushion until it detaches from the rest of the headphones
-
-
-
Use a Phillips #000 screwdriver to remove the eight screws along the outer inside edge.
-
There should be a piece of grey foam you can simply remove to uncover the centre 4 screws.
-
Flip the headphones to the other side and slow lift up the back plastic cover piece.
-
Gently remove the touch sensor's ribbon cable by pulling it out evenly from the main board.
-
To reassemble your device, follow these instructions in reverse order.
One comment
Hey folks, thanks for taking the time to layout this procedure. These headphones are amazing, and this really helps me get my friends onboard.