Samsung Galaxy S23 Ultra Motherboard Removal

Written By: Alex Diaz-Kokaisl
  • Comments: 0
Samsung Galaxy S23 Ultra Motherboard Removal

Difficulty

Moderate

Steps

10

Time Required

No estimate

Introduction

This is a prerequisite-only guide! This guide is part of another procedure and isn't meant to be used alone.

  1. NuJYgHVKFUavTcLN
    NuJYgHVKFUavTcLN
    Fp1ArDosmVw2o1Ev

    • Use the point of your spudger to pry up and disconnect the front-facing camera press connector.

  2. kKNUGZCWsqIhe56f
    kKNUGZCWsqIhe56f
    ylDQjNhrRObyvnCo

    • Use your spudger to pry up and disconnect the fingerprint reader press connector.

  3. PIQuIseXNMXJFVRC
    PIQuIseXNMXJFVRC
    nhOTHJMM4MbLenDX

    • Use the point of your spudger to pry up and disconnect the screen press connector from the motherboard.

  4. wsNS5GUIgJ1Hj4nD
    wsNS5GUIgJ1Hj4nD
    I14vO2yAQaYIGLjw

    • Use the point of your spudger to pry up and disconnect the screen press connector from the display cutout near the bottom of the phone.

  5. TK3KClBc5guF14Nr

    • Grab and remove the screen cable from the frame.

  6. xNxqRJvEnipAscaw
    xNxqRJvEnipAscaw
    4YiVHa3akcTc5RvA

    • Use the point of your spudger to pry up and disconnect the right 5G mmWave antenna press connector.

  7. SQhUDbPZWxCjQmkx
    SQhUDbPZWxCjQmkx
    oEZef5r5eIpyM2fC

    • Use the point of your spudger to pry up and disconnect the stylus press connector.

  8. yJGRKqOMNHBqkYxJ
    yJGRKqOMNHBqkYxJ
    UFqYA1tPLIHfYRuD

    • Use the point of your spudger to pry up and disconnect the left 5G mmWave antenna press connector.

  9. Kub2fThk4fb1ENVS

    • Use your Phillips screwdriver to remove the single 4 mm-long screw securing the motherboard.

  10. KuUFxjRQiMNvRiNd
    KuUFxjRQiMNvRiNd
    bs1hD1piGTbOabZf
    E4JEGJHYuWOrBF6R

    • Insert the point of your spudger between the top left of the motherboard and the frame.

    • Pry the motherboard up until you can grab it with your fingers.

    • Grab the motherboard and remove it from the frame.

    • Be careful not to snag any loose cables.

    • During reassembly, make sure the cables are above the motherboard when reinserting it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alex Diaz-Kokaisl

Member since: 16/01/22

163004 Reputation

0 comments